Product ID:WALLHIDE NAVAJO WHITE, 80-147
MSDS Date:06/16/1992
FSC:8010
NIIN:00N034407
MSDS Number: BPWGM

PPG INDUSTRIES INC

4325 ROSANNA DRIVE
ALLISON PARK, PA 15101
US

Emergency Phone: 412-492-5555;304-843-1300

Info Phone: 216-572-6111;800-441-9695

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

TO CRYSTALLINE SILICA/QUARTZ MAY ALSO LEAD TO A

RTECS: 9999999ZZ

ASSOC W/BRTHG EXCESS AMTS OF SILICA DUST. APPLICATN

RTECS: 9999999ZZ

RESPIRABLE SILICA/QUARTZ, SO POTNTL HAZ FOR HUMANS

RTECS: 9999999ZZ

DISTURB MAY INDICATE EXCESS EYE CONT. DRY, ITCH,

RTECS: 9999999ZZ

LEL BELOW STATED LIM, & TO REMOVE DECOMP PROD DURING

RTECS: 9999999ZZ

NITRILE, NEOPRENE, OR LATEX.

RTECS: 9999999ZZ

ALUMINUM SILICATE. MFR CAS# 1332-58-7

Fraction By Weight: 2-5%

SILICA, CRYSTALLINE-FUSED; (SILICA, AMORPHOUS-FUSED)

CAS: 60676-86-0

RTECS: VV7328000

Fraction By Weight: 1-2%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

DIATOMACEOUS EARTH, FLUX-CALCINED; (SILICA,

CAS: 68855-54-9

Fraction By Weight: 5-10%

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 15-20%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

CLAY (KAOLIN)

CAS: 1332-58-7

RTECS: GF1670500

Fraction By Weight: 2-5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST; 9293

ETHYLENE GLYCOL

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 1-2%

OSHA PEL 50 PPM, C

ACGIH TLV: 50 PPM, C

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 25-30%

PROPIONIC ACID, 2-METHYL-, MONOESTER

CAS: 25265-77-4

RTECS: UF6000000

Fraction By Weight: 1-2%

WATER (DEIONIZED)

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 20-25%

WATER (TAP)

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 2-5%

FILM FORMERS, RESINS, & ADDITIVES

Fraction By Weight: 10-15%

SILICA, CRYSTALLINE - CRISTOBALITE

CAS: 14464-46-1

RTECS: VV7325000

Fraction By Weight: 1-2%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.05 MG/M3 RDUST9293

SILICA, CRYSTALLINE - QUARTZ; (QUARTZ)

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 2-5%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

BIRTH DEFECTS IN LAB ANIMALS. NO EVIDENCE OF

RTECS: 9999999ZZ

OF CRYSTALLINE SILICA/QUARTZ WHICH IARC ASSOC W/AN

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INGEST:HARMFUL/FATAL IF
SWALLOWED. EYE: CAUSES IRRIT. SKIN: MAY CAUSE SLIGHT IRRIT. INHAL:
VAP & SPRAY MIST MAY BE HARMFUL IF INHALED. VAP GENERATED @
ELEVATED TEMP IRRITATES EYES/NOSE/THROAT. S AND & GRIND DUSTS MAY
BE HARMFUL IF INHALED. CHRONIC: AVOID LONG TERM & RPTD CONT. PROD
CNTNS TITANIUM (EFTS OF OVEREXP)
Explanation of Carcinogenicity:CRYSTALLINE SILICA QUARTZ AND
CRISTOBALITE : GROUP 2A(IARC).
Effects of Overexposure:HLTH HAZ: DIOXIDE. ANIMALS INHALING MASSIVE QTY
OF TITANIUM DIOXIDE DUST IN A LONG-TERM STUDY DEVELOPED LUNG
TUMORS. STUDIES W/HUMANS INVOLVED IN MFR OF PIGMENT INDICATE NO
INCR RISK OF CANCER FROM EX POS. POTNTL FOR INHAL OF TITANIUM
DIOXIDE DUSTS FROM COATINGS IS VERY LIM. SINCE OVEREXP ARE NOT
EXPECTED, (SUPP DATA)

First Aid:INGEST: DO NOT INDUCE VOMIT. EYE: FLUSH IMMED W/PLENTY OF
H*2O FOR @ LST 15 MIN. SKIN: FLUSH IMMED W/PLENTY OF H*2O FOLLOWED
BY WASHING W/SOAP & H*2O. INHAL: REMOVE TO FRESH AIR. APPLY ARTF
RESP & OTH ER SUPPORTIVE MEASURES AS REQD. OTHER: IF INGEST, ANY
TYPE OF OVEREXP/SYMP OF OVEREXP OCCUR DURING OR FOLLOWING USE OF
PROD, CONT POIS CTL CTR, EMER ROOM/PHYS IMMED; HAVE MSDS INFO
AVAILABLE.

Flash Point Method:PMCC
Lower Limits:0.0%
Extinguishing Media:USE NATL FIRE PROT ASSOC CLASS B EXTING (CO*2, DRY
CHEM/UNIVERSAL AQUEOUS FILM FORMING FOAM) DESIGNED TO (SUPP DATA)
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP. H*2O
SPRAY MAY BE INEFFECTIVE. H*2O SPRAY MAY BE USED TO COOL CLSD
CONTRS TO PVNT PRESS BUILD-UP & (SUPP DATA)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE OR BURST
(DUE TO BUILD-UP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME HEAT.

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
RESP & SKIN/EYE PROT SHOULD BE PERMITTED IN AREA. REMOVE ALL
SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST, VERMICULITE/OTHER
ABSORBENT MATERIAL AND PL ACE INTO CONTAINERS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LG QTY
IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA CLASS IIIB
COMBUSTIBLE LIQUIDS. PROTECT FROM FREEZING.
Other Precautions:IF MATERIAL IS PART OF A MULTIPLE COMPONENT COATING
SYSTEM, READ MATERIAL SAFETY DATA SHEET(S) FOR THE OTHER COMPONENT
OR COMPONENTS BEFORE BLENDING AS THE RESULTING MIXTURE MAY HAVE THE
HAZARD OF ALL OF ITS PARTS.

Respiratory Protection:WHERE VENTILATION IS INADEQUATE, USE A
NIOSH/MSHA APPROVED SUITABLE RESPIRATOR.
Ventilation:PROVIDE GEN DILUTION/LOC EXHAUST VENT IN VOL & PATTERN TO
KEEP CONC OF INGRED BELOW LOWEST SUGGESTED EXPOS LIM, (ING 20)
Protective Gloves:IMPERMEABLE GLOVES CONSTRUCTED (ING 21)
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR PROTECTIVE CLTHG, INCL IMPERMEABLE
APRON CONSTRUCTED OF: NITRILE, NEOPRENE, OR LATEX.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health
EXTING MEDIA: EXTING NFPA CLASS IIIB COMBUSTIBLE LIQ FIRES. FIRE FIGHT
PROC: POSS AUTOIGNIT/EXPLO WHEN EXPOSE TO EXTREME HEAT. IF H*2O IS
USED, FOG NOZZ ARE PREF. EFTS OF OVEREXP: THERE IS NO SIGNIFIC ANT
HAZ FOR MAN. PROD CNTNS ETHYLENE GLYCOL WHICH MAY CAUSE KIDNEY &
LIVER DAM & WHICH HAS BEEN SHOWN TO CAUSE (ING 14)

HCC:N1
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:17.2
Vapor Density:HVR/AIR
Spec Gravity:1.30
Evaporation Rate & Reference:33(BUTYL ACETATE=1)
Solubility in Water:53.4%
Appearance and Odor:VISCOUS LIQ W/AN ODOR CHARACTERISTIC OF THE CHEM
FAMILY & ANY SOLV INGREDIENTS.
Percent Volatiles by Volume:70.10

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE DECOMP PROD WHEN HEATED.
WELD/BRAZ/FLAME-CUTTING ON SURF COATED W/PROD MAY PRDCE FUMES INCL:
CO, FORMALDEHYDE.

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF I/A/W
FEDERAL, STATE, PROVINCIAL, AND LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH AN APPROVED WASTE MANAGEMEN T FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.